RKS.160.16.1424 SKF Slewing Ring Bearings | e - ISO Factor3:0.41; C1 - Cup Flange Width:0.1406 in; r - Cup Backface To Clear Radius1:0.06 in; D:3.3465 in; Design Units:Imperial; K - Factor2:1.44; Cg - Geometry Factor5:0.0789; Da - Cup Frontface Backing Diameter:3.27 in; Cup Part Number:18720-B; D1 - Flange Outer Diameter:3.4870 in; C - Cup Width:0.5313 in; Series:18700; Y - ISO Factor4:1.48; |
RKS.220641 SKF Slewing Ring Bearings | Dimension RV:0.29 in; Dimension BC:11.75 in; Pre Install Clearance Max:0.0067 in; Oil Lubrication - B/C/O Seal:400 rpm; C0 - Static Load:212000 lb; Oil Lubrication - M/N Seal:700 rpm; Y2 - Geometry Factor:3.90; Dimension C:6.880 in; Weight:72 lb; Float:0.083 in; e - Geometry Factor:0.26; Engineering Group:Mounted Bearing; Grease Lubrication - B/C/O Seal:400 rpm; Grease Lubrication - T Seal:1000 rpm; |
RKS.425060201001 SKF Slewing Ring Bearings | d:31.986 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:4180 lbf; D:72.233 mm; K - Factor7:1.07; Cg - Geometry Factor:0.0822; e - ISO Factor8:0.55; Da - Cup Frontface Backing Diameter:69.10 mm; Series:HM88600; Design Units:Imperial; Bearing Weight:0.5 Kg; B:25.397 mm; Cone Part Number:HM88638; C1 - Dynamic Radial Rating (1 million revolutions)5:17300 lbf; Cup Part Number:HM88610; R - Cone Backface To Clear Radius1:3.300 mm; |
A6-11E4 Rotek Slewing Ring Bearings | Weight:2.00 lb; Threads No. per Inch:12; L:2.835 in; Major Dia - B:3.527 in; Taper:1:12; A:3.163 in; G:0.472 in; F:0.084 in; d:2.756 in; |
RKS.161.16.1534 SKF Slewing Ring Bearings | D:920.000 mm; UPC Code:087796198913; r - Outer Ring To Clear Radius2:6.000 mm; da - Inner Ring Backing Diameter:585.000 mm; Cage Type:YMB; Reference Thermal Speed Rating (Grease):250; Y0 - ISO Factor4:1.9; Cg - Geometry Factor8:0.11; C1(2) - Dynamic Radial Rating (Two-Rows):10900000 N; Y2 - ISO Factor6:1.86; Design Unit:METRIC; Reference Thermal Speed Rating (Oil)7:260; C0 - Static Radial Rating:17900000 N; |
L4-13P8ZD Rotek Slewing Ring Bearings | N:15 mm; L:255 mm; G:M12; Housing Mass:5.30 Kg; N1:20.00 mm; J1:35 mm; C0 Static Load Rating:151; C1 Dynamic Load Rating:163; Shaft Diameter da:50 mm; Bolt Qty:2; End Cover1:EC512-610; Locating Rings (width x OD):SR110X10.5; Seal:TSNG310; Material :Cast Iron; Max Grease Speed:4900; Bearing:21310; Seal Type:Double Lip; UPC Code:999999999; J:210.00 mm; Max Oil Speed:5900; |
RKS.060.25.1644 SKF Slewing Ring Bearings | Bearing Weight:4.7 lb; Cg - Geometry Factor11:0.111; G1 - Heat Generation Factor (Roller-Raceway)10:91; C1 - Cup Flange Width:0.2500 in; a - Effective Center Location3:-0.37 in; B - Cone Width:1.4440 in; Da - Cup Frontface Backing Diameter:4.60 in; Cup Part Number:552-B; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:0.09 in; G2 - Heat Generation Factor (Rib-Roller End):21.1; Series:555; |
M4-22P4 Rotek Slewing Ring Bearings | C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:4390 lbf; Aa - Cage-Cone Backface Clearance:-0.02 in; Design Units:Imperial; B - Cone Width:0.6522 in; d:1.1806 in; a - Effective Center Location4:-0.14 in; K - Factor8:1.53; G2 - Heat Generation Factor (Rib-Roller End):7.5; db - Cone Backface Backing Diameter:1.52 in; Ab - Cage-Cone Frontface Clearance:0.1 in; Cage Type:Stamped Steel; |
R8-39N3 Rotek Slewing Ring Bearings | Foot Height H1:19.1 mm; Total Height H2:106.4 mm; Dynamic Load Rating:8160 lbf; Weight:7.055 lb; Seal Type:Tri-Ply Seal; Static Load Rating:4600 lbf; Inside Ring Outside Diameter:0.720 in; Bolt Hole Spacing J:149.2 mm; Bearing Number:G1112KPPB4; Dimension T:1.031 in; Bolt Hole Width N:14.3 mm; Housing Style:Two-Bolt Pillow Bloc; Inside Ring Width B:=Bearings1_Inside Ri; Dimension L1:63.8 mm; Base to Center Height H:53.98 mm; |
M5-16P1 Rotek Slewing Ring Bearings | e - Geometry Factor:0.26; Dimension H:2.04 in; Dimension K:2.31 in; Shaft Tolerance:0.0050 in; Oil Lubrication - M/N Seal:700 rpm; Oil Lubrication - B/C/O Seal:400 rpm; Dimension C:6.89 in; Dimension J (Bolt Size):1.000 in; Float:0.083 in; Housing Style:Four-Bolt Pillow Blo; Shaft Size :125 mm; Grease Lubrication - M/N Seal:700 rpm; Dimension M:3.72 in; Full Timken Part Number:QMPH26J125SB; |
RKS.061.20.0744 SKF Slewing Ring Bearings | Radial Clearance:0.410 to 0.550 mm; Dynamic Load Rating:6,100,000 N; Retainer Material:Machined Brass; Configuration:Double Row; Constant e:0.32; Nr. of Holes:8; Da (max):652 mm; Fillet Radius/Chamfer:6 mm; Groove Width A:40 mm; Limiting Speed - Oil:640 rpm; B:218 mm; Hole Diameter (do):20 mm; Static Load Rating:9,650,000 N; ra (max):5 mm; da (min):488 mm; Axial Load Factor Y0:2.07; Limiting Speed - Grease:510 rpm; |
L9-38P9Z Rotek Slewing Ring Bearings | Taper:1:12; Tolerance1:-0.003 in; Bearing Number:22210K; Series:222K; D1:2.693 in; S:0.558 in; B2:1.755 in; Sleeve:S-10 x 1 5/8; SNW/SNP Assembly Weight:0.9 lb; Diameter d :1 5/8 in; Locknut:N-10; Lockwasher and Lockplates:W-10; |
RKS.921155203001 SKF Slewing Ring Bearings | K - Factor7:1.83; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10300 lbf; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5930 lbf; G1 - Heat Generation Factor (Roller-Raceway)11:33.8; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:39900 lbf; G2 - Heat Generation Factor (Rib-Roller End):14; |
R8-30E3 Rotek Slewing Ring Bearings | C:9.849 in; H:0.323 in; Major Diameter d:7.847 in; D:1.198 in; Threads No. per Inch:8; G:0.735 in; Weight:8.50 lb; E:9.156 in; |
No. | Brand | t | e | N | d | i | S | b | F |
RKS.210841 | SKF | - | - | - | - | - | - | - | - |
RKS.302070202001 | SKF | - | - | - | 80 mm | - | - | - | - |
M4-34P4 | Rotek | - | - | - | - | - | 1.479 in | - | - |
M5-34P1Z | Rotek | - | - | - | - | - | - | - | - |
A6-11P5 | Rotek | - | - | - | 90 mm | - | - | - | - |
RKS.222605101001 | SKF | - | - | - | - | - | - | - | - |
A8-17N4D | Rotek | - | - | - | - | - | - | - | - |
VSI201094-N | INA | - | - | - | 39.980 mm | - | - | - | - |
RKS.160.14.0414 | SKF | - | - | - | - | - | - | - | - |
RKS.160.16.1314 | SKF | - | - | - | - | - | - | - | - |
RKS.220841 | SKF | - | - | - | 40 mm | - | - | - | - |
W13-35P1 | Rotek | - | - | - | 2 in | - | - | - | - |
L6-22E9ZD | Rotek | - | - | - | - | - | - | - | - |
H7-30E1 | Rotek | - | - | - | - | - | - | - | - |
RKS.061.25.1314 | SKF | - | - | - | - | - | - | - | - |
A12-18E5 | Rotek | - | - | - | 300 mm | - | - | - | - |
RKS.060.25.1424 | SKF | - | - | - | - | - | - | - | - |
RKS. 312410101001 | SKF | - | - | - | 165.1 mm | - | - | - | - |
VSA250955-N | INA | - | - | - | 1.9375 in | - | - | - | - |
M5-22P1Z | Rotek | - | - | - | 55 mm | - | - | - | - |
L6-33N9ZD | Rotek | - | - | - | 333.375 mm | - | - | - | - |
M5-26P1 | Rotek | - | - | - | 45 mm | - | - | - | - |
RKS.23 0641 | SKF | - | - | - | 25 mm | - | - | - | - |
VLA200944-N | INA | - | - | - | 12.5000 in | - | - | - | - |
L6-16P9Z | Rotek | - | - | - | - | - | - | - | - |
RKS.060.20.0844 | SKF | - | - | - | - | - | - | - | - |
RKS.211091 | SKF | - | - | - | 50 mm | - | - | - | - |
A12-34P2B | Rotek | - | - | - | 100 mm | - | - | - | - |
RKS. 212600101001 | SKF | - | - | - | - | - | - | - | - |
L6-16N9Z | Rotek | - | - | - | - | - | - | - | - |
RKS.161.16.1754 SKF Slewing Ring Bearings Video