| 24 0411 01 Rollix Slewing Ring Bearings | B:30 mm; d1:300 mm; H:90 mm; da min.:295 mm; D1:154 mm; ra max.:4 mm; Minimum axial load factor A:2.509; Basic dynamic load rating C:1250 kN; d:150 mm; r1,2 min.:4 mm; Reference speed:500 r/min; Basic static load rating C0:5600 kN; Da max.:168 mm; Mass bearing:35.4 kg; Limiting speed:1000 r/min; Fatigue load limit Pu:480 kN; D:300 mm; |
| 192.25.2000.990.41.1502 Standard 5 Slewing Ring Bearings | H:247.65 mm; s:77.787 mm; Attachment bolt diameter G:19.05 mm; A1:136.525 mm; J max.:368.3 mm; Basic dynamic load rating C:408 kN; A:117.475 mm; H1:120.65 mm; d2:155.575 mm; Mass bearing unit:32.3 kg; J1:63.5 mm; J min.:333.375 mm; S:0.794 mm; L:422.275 mm; B:155.575 mm; H2:69.85 mm; da:112.713 mm; Limiting speed:1900 r/min; |
| 11.40.2240.000.11.1502 Standard 5 Slewing Ring Bearings | Calculation factor f2D:1.14; Number of balls z:20; Preload class D GD:320 N; ra max.:0.3 mm; Basic static load rating C0:4.3 kN; d1:35.6 mm; r1,2 min.:0.3 mm; Da max.:45 mm; Preload class C GC:160 N; Calculation factor f2B:1.04; Preload class B GB:80 N; Calculation factor e:0.68; a:13.6 mm; B:9 mm; db min.:32 mm; Calculation factor f2A:1; Static axial stiffness, preload class B:83 N/µm; Static axial stiffness, preload class A:65 N/µm; |
| 92.35.1900.991.41.1502 Standard 5 Slewing Ring Bearings | Housing:SAF 640; Taconite seal:TER 664; H1:250.825 mm; Initial grease fill:3515.4 g; ba:103.188 mm; P150°:151 kN; R2:50.8 mm; P90°:271 kN; Max. speed for Taconite seal:425 r/min; Da:419.999 mm; Cap bolt recommended tightening torque:1017 N·m; H:495.3 mm; h:87.313 mm; Appropriate attachment bolt size G:1.5 in; J min.:666.75 mm; J1:139.7 mm; Cap bolt:4 x 1 1/2-6 UNC; PG:1/4 NPT; End plug (suffix Y):EPR 21; |
| 92.35.2012.990.11.1502 Standard 5 Slewing Ring Bearings | d:40.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; Oil Speed Rating Open/Shielded n2:14000 rpm; Sealed Speed Rating n3:7500 rpm; B:7.00 mm; D:52.0000 mm; Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:4150 N; Accessories:One Seal; Basic Dynamic Radial Load Rating C:4940 N; |
| 12.35.2690.000.11.1503 Standard 5 Slewing Ring Bearings | H:244.475 mm; P120°:66.7 kN; End plug (suffix Y):EPR 15; Labyrinth ring:2 x LOR 118; Eye bolt:2 x 3/8-16 UNC; RG:3/8 NPT; Initial grease fill:232.47 g; Cap bolt:5/8-11 UNC; h:40.922 mm; PosiTrac Plus contact element:2 x B10724-117; Ca:62.789 mm; P90°:107 kN; P60°:178 kN; Stabilizing ring:2 x 38151-26; P180°:72.5 kN; Da:200 mm; Mass pillow block:52.2 kg; ba:51.594 mm; PG:1/4 NPT; H1:125.425 mm; |
| 91.35.1900.990.11.1502 Standard 5 Slewing Ring Bearings | Mass needle roller:2.55 g; Lw:25.8 mm; r2 max.:1 mm; r1,2 min.:0.3 mm; Dw:4 mm; r1 max.:0.8 mm; |
| 28 0411 01 Rollix Slewing Ring Bearings | rs:0.3 mm; Weight:0.018 kg; Grease:35 000 min-1; Pu:0.075 kN; B:7 mm; d:9 mm; Oil:42 000 min-1; da:11 min; D:24 mm; Bearing designation:609 ; ra:0.3 max; Static (Cor):1.640 kN; Dynamic (Cr):3.668 kN; Da:22 max; |
| 192.40.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Calculation factor f2A:1; Attainable speed for grease lubrication:7500 r/min; Basic dynamic load rating C:58.5 kN; rb max.:0.6 mm; db min.:116 mm; da min.:116 mm; Calculation factor f:1.26; Static axial stiffness, preload class B:359 N/µm; Calculation factor (single, tandem) Y2:0.87; Attainable speed for oil-air lubrication:12000 r/min; d2:122.3 mm; Fatigue load limit Pu:2.55 kN; Calculation factor (single, tandem) X2:0.41; |
| 11.30.2031.601.41.1503 Standard 5 Slewing Ring Bearings | D1:82 mm; Mass housing washer:1.02 kg; r1,2 min.:1.5 mm; D:140 mm; B:12.5 mm; |
| 191.40.4000.990.41.1502 Standard 5 Slewing Ring Bearings | J min.:150.813 mm; L:212.725 mm; s:25.4 mm; H:117.872 mm; B:73.025 mm; J max.:174.625 mm; Attachment bolt diameter G:15.875 mm; H2:34.925 mm; Mass bearing unit:4.13 kg; A1:77.787 mm; H1:57.15 mm; d2:73.819 mm; Limiting speed:5000 r/min; Basic dynamic load rating C:84.5 kN; S:0.794 mm; da:50.8 mm; A:58.737 mm; |
| 161.40.2000.891.41.1503 Standard 5 Slewing Ring Bearings | Da max.:90 mm; T:36 mm; Da min.:84 mm; Calculation factor Y0:0.9; Db min.:94 mm; r3,4 min.:2.5 mm; a:24.464 mm; ra max.:2.5 mm; B:35 mm; Mass bearing:1.31 kg; Calculation factor Y:1.7; Ca min.:6 mm; C:30 mm; rb max.:2.5 mm; da max.:59 mm; Limiting speed:6700 r/min; Cb min.:6 mm; Reference speed:5600 r/min; d:50 mm; r1,2 min.:2.5 mm; |
| 6 0475 22 Rollix Slewing Ring Bearings | R2:21.431 mm; RG:3/8 NPT; A2:134.938 mm; P180°:23.1 kN; Stabilizing ring:SR-16-13; Cap bolt recommended tightening torque:298.3 N·m; H2:31.75 mm; J min.:244.475 mm; P120°:21.8 kN; ba:40.481 mm; Cap bolt, SAE grade:8; Ca:57.785 mm; End plug (suffix Y):EPR 7; Housing:FSAF 613; Mass pillow block:18.1 kg; Initial grease fill:87.885 g; J max.:279.4 mm; Max. speed for PosiTrac Plus seal:2600 r/min; |
| 161.45.2510.891.41.1503 Standard 5 Slewing Ring Bearings | H2:110 mm; P180°:2400 kN; P120°:2200 kN; Locating ring:2 x FRB 10/500; Oil level, min.:85 mm; Q180°:1430 kN; A1:310 mm; Appropriate attachment bolt, size G:36 mm; L:830 mm; Da:500 mm; Ca:180 mm; Oil level, max.:99 mm; N:50 mm; H:591 mm; A:345 mm; Cap bolt, rec. tightening torque:400 N·m; Pa:1500 kN; Cap bolt, size:M 30x220; Appropriate attachment bolt, rec. tightening torque:2280 N·m; |